ProductsPRODUCTS CENTER
  • A380背面-电源特写500
  • A380侧面
  • 双路路A380背面500
  • A380背面-电源特写500
  • A380侧面
  • 双路路A380背面500

FDCT-GSM-[**]380 Fixed Dual Cellular Terminal

FDCT (Fixed dual Cellular Terminal), dual communication channel can achieve simultaneous concurrency with white A380 appearance and 2G GSM network standard industrial module. Turn 2 phone cards into two RJ11 telephone lines and work simultaneous, which can perfectly replace operator's telephone line (PSTN) under some individual situation. Be used with VOIP voice gateway, telephone landline, analog voice boards, telephone recording box, security alarm host and so on.

Related products :
  • product details
  • technical parameter
  • Related problems

  Fixed Dual Cellular Terminal (FDCT), two-way GSM platform series using 2G industrial module and GSM network system

mode. 2 SIM cards can be inserted at the same time, providing two communication channels simultaneous concurrency, equal to providing two telephone lines (PSTN).
Can provide "reverse pole signal" to accurately billing.
If you are holding encryption card wireless calling card,contact us for technical support to decrypt and upgrade .

195b6265b86d23ce.jpg

-Can access tele set from outside; set various of functions through the phone button; facilitate the equipment to do compatibility adjustment.
-Carry with two RJ11 telephone port,equal to provide two PSTN lines to achieve two way to call simultaneous concurrency.
-LCD English display screen, digital visual display signal strength value.
-Telephone box can automatically supply voltage 5V-12V,easily apply power for all kinds of security equipment.
-Circuit with anti-jamming design, no noise in the call and other noise, sound clear.
-3 meters pure copper antenna, suitable for some bad signal scene, improve the communication signal.
-Built-in watchdog system; when the system doesn’t work, it will automatically restart to prevent crash or other situation.
-Suitable for connecting telephone voice boards, telephone recording box, pbx, FXO voice gateway or other equipment, which need to connect more than one telephone lines.

产品功能

-Through the external connect telephone button, clear all the parameters and reset it.
-TheFWT call volume can be set to avoid the sound is too large to produce an echo.
-The IP prefix can be set by key, for some wireless fixed-line dial-up number, which need to add IP prefix. and different IP prefix can be provided for local, long distance or international call.
-The DTMF call ring can be set. [**]lso perfectly compatible to solve a variety of caller ID is disappear or incomplete. (First ringing and then show the number or the first number and then ring).
-Caller ID mode supported FSK for special models, through the key settings to take effect. For only support FSK caller ID device, solve the problem of no caller ID.
-Can be set to prohibit incoming calls. Can be set an incoming call list or an incoming blacklist.
-Can set the second dial mode and automatically use it to outgoing call. (The second dial mode does not provide an accurate "reverse pole" signal.)
-Partial custom models can support the key setting in 12K or 18K billing signal mode.
-Can be set the phone comes with the screen or external telephone screen display device communication module IMEI.
-Can manually modify IMEI of the built-in communication module and offer the specified IMEI for the particular application.
-Can be set to "take up time", "busy tone time" to adapt special equipment applications in ideal compatibility.

应用场景

★ Cooperation with the telephone recording box: through RJ11 port to match up with wired telephone recording box and achieve the outgoing recording, incoming screen popup and so on through phone card. 
★ Cooperation with analog voice board: through RJ11 telephone wire to connect the analog voice board, through the phone card  to provide "anti-polar signal" telephone line for the voice card, and alternative operators telephone line (PSTN). 

★With the call center software to achieve through the phone card access call center system and various applications.
★ Cooperation with PBX: through RJ11 telephone line to connect PBX, which through the phone box to call out. When phone is on, FWT will provide the "reverse pole signal" to inform PBX that phone is on. [**]t the same time, it will provide a caller ID. [**]gainst for mostly telephone lines can not provide "reverse pole signal", resulting in part of PBX function can not be used. What's more, some of the mobile phone cards cost low tariffs, it  provides more cheap choice of communication charge for enterprise exchange customers.
★ Cooperation with the traffic telephone: telephone line can be connected to the call center dedicated telephone, through traffic telephone to outgoing call. The caller ID will be displayed when the phone is connected. 
★ Cooperation with the wireless fixed-line card application: part of the fixed wireless card need to use a dedicated decryption card stickers. Part of the area can be customized built-in key to achieve the use of decryption stickers.
★ Cooperation with ordinary landline telephone: through the telephone wire to connect ordinary landline telephone, the equivalent of a "wireless fixed platform"; can easily achieve incoming, outgoing call, caller ID and so on.  


 

During the usage of the white marketing box, the parameters are nomally, as well as the download. But when start it to test, it has interference between the computer and equipment as a result of high frequency.

*Exit the antivirus software, restart the machine and restore to default. 

 The antenna is too close to the machine.

 Turn off and then turn on.

 Change another computer.




I have brought this equipment for a long time, and it keeps displaying "dialing" and sometime the LCD show in reverse without connecting tel set and during a call. Even reset it cannot solve.

*The SRICK is broken, you can change it at a cell phone store or send back to us for repair.

Fail to open the software can not open, it keeps showing that there is no D disk?

* Because your compter doesn't have D disk. The program is installed at D disk by default and the C disk need permission to install.

Solution: Install a D disk or change the computer.

Set the white marketing box to dial without playing voice and hearing what people says on the other side of the phone, but he can hear what we say.

*Set on duty mode 4.