ProductsPRODUCTS CENTER
  • FWT801-1无线接入台500-500
  • FWT801-2无线接入台500-500
  • FWT801-3无线接入台500-500
  • FWT801-5无线接入台500-500
  • FWT801-4无线接入台500-500
  • FWT801-1无线接入台500-500
  • FWT801-2无线接入台500-500
  • FWT801-3无线接入台500-500
  • FWT801-5无线接入台500-500
  • FWT801-4无线接入台500-500

FWT801- Ordinary 8-Way Fixed Wireless Terminal-Radio [**]ccess Platform

FWT801 series is an ordinary 8-way fixed wireless terminal, each port for one SIM card. FWT801 has a LCD screen to display device information. Can be quickly and easily set through the computer. Can outgoing as well as incoming call. Coordinate with the analog voice board, can fully support DTM. At the same time can also be used with VOIP voice gateway, with a simple VOIP landing. Equipment Model: FWT801G (GSM), FWT801W (WCDMA), FWT801C (CDMA), FWT801T (TD).

Related products :
  • product details
  • technical parameter
  • Related problems

  FWT801 series is an ordinary 8-way fixed wireless terminal, each port for one SIM card. FWT801 has a LCD screen to display device information. Can be quickly and easily set through the computer data wire. Can outgoing as well as incoming call. Coordinate with the analog voice board, can fully support DTMF, such as DMTF input for mobile voice recharge service. [**]t the same time can also be used with VOIP voice gateway, with a simple VOIP landing. Equipment Model: FWT801G (GSM), FWT801W (WCDM[**]), FWT801C (CDM[**])

195b6265b86d23ce.jpg

-Carry with two RJ11 telephone port, easily parallel connect landline,recording box and other similar equipment.
-LCD English display screen; digital visual display signal strength value.
-Telephone box can automatically supply voltage 5V-12V, which can easily apply power for all kinds of security equipment.
-Circuit with anti-jamming design, no noise in the call and other noise, sound clear.
-3 meters pure copper antenna, suitable for some bad signal scene, improve the communication signal.
-Built-in watchdog system; when the system doesn’t work, it will automatically restart to prevent crash or other situation.
-Products can optional add an additional built-in battery, suitable for some security, elevators and other situations. [**]pplication of the blackout to make the distress call phone.
-Can access the ordinary telephone from outside; set various of functions through the phone button; facilitate the equipment to do compatibility adjustment

6b6926e99aa0c1e4.jpg

-Through the external connect telephone button, clear all the parameters and reset it.
-The call volume can be set to avoid the sound is too large to produce an echo.
-The IP prefix can be set by key, for some wireless fixed-line dial-up number, which need to add IP prefix. [**]nd different IP prefix can be provided for local, long distance or international call.
-The DTMF call ring can be set. [**]lso perfectly compatible to solve a variety of caller ID is disappear or incomplete. (First ringing and then show the number or the first number and then ring)
-Caller ID supports FSK for special models, through the key settings to take effect. For only support FSK caller ID device.
-Can be set to prohibit incoming calls. Can be set an incoming call list or an incoming blacklist.
-Can set the second dial mode and automatically use it to outgoing call. (The second dial mode does not provide an accurate "reverse pole" signal.)
-Part of the models can support key setting 12K or 18K billing signal mode.
-Can be set the phone box comes with the screen or external telephone screen display device communication module IMEI.
-Can manually modify IMEI of the built-in communication module and offer the specified IMEI for the particular application.
-Can be set to "take up time", "busy tone time" to adapt special equipment applications in ideal compatibility.

659a47085cbfce92.jpg

★ Cooperation with the telephone recording box: through RJ11 port to match up with wired telephone recording box and achieve the outgoing recording, incoming screen popup and so on through phone card.
★ Cooperation with analog voice board: through RJ11 telephone wire to connect the analog voice board, through the phone card  to provide "anti-polar signal" telephone line for the voice card, and alternative operators telephone line (PSTN). With the call center software to achieve through the phone card access call center system and various applications.
★ Cooperation with pbx: through RJ11 to connect PBX, which through the phone box to call out. When phone is on,it will provide the "reverse pole signal" to inform pbx that phone is on. [**]t the same time, it will provide a caller ID. [**]gainst for mostly telephone lines can not provide "reverse pole signal", resulting in part of pbx function can not be used. [**]nd some of the mobile phone cards cost low tariffs, it  provides more cheap choice of communication charge for enterprise pbx customers.
★ Cooperation with the traffic telephone: telephone line can be connected to the call center dedicated telephone, through traffic telephone to outgoing call. The caller ID will be displayed when the phone is connected. Has been coordinate with the traffic telephones;
★ Cooperation with the wireless fixed-line card application: part of the fixed wireless card need to use a dedicated decryption card stickers. Part of the area can be customized built-in key to achieve the use of decryption stickers.
★ Cooperation with ordinary landline telephone: through the telephone wire to connect ordinary landline telephone, the equivalent of a "wireless fixed platform"; can easily achieve incoming, outgoing call, caller ID and so on.  


The caller ID cannot be completed shown in the white marketing box.

*Delete the LUXU-SM[**]LL folder at D disk. The restore default settings, save, restart, click read out ,the number will be completed. (Don't change the parameters without reason, which will has abnormal when it is changed to limit value )

The vice module of white marketing box signal is not stable,will it interrupt the voice playing or transfer?

*Wait a moment again.

 Check if the signal is seting in right way: use mobile phone to dial the number and the vice card, if both can be connected and talk well, they prove the signal is fine. The signal shown on the LCD might not always be accuracy and it won't influence the usage. 


The marketing has no effect.

*The number has been marked from too many people. Check the number from the internet and then periodically change number or make your company name on it too for advertisting.

The timing function of white marketing box will keep dialing to midnight, sometime the time is accuracy and sometime is not, which will dial at the time without setting.

*The advertising machine's time is desynchrony with Beijing time, re-download the parameters to the advertising machine.

 Firstly, turn on the timing function, setting 4 different period, which are not not in conflict. Then it is recommended to save the setting at the left side of the software after each step during the setting in case it does't work. Finally, unplug the date cable when the peremeters download is finished.

(Remark: don't click start voice and the black button beside the machine, otherwise it will be void)



The white marketing box can not be called in.

*By default, you need to press to transfer after playing voice; if choosing ring and waiting for answering, it can be call in like ordinary tel set. Both tele set and marketing box can show caller ID.

[**]fter connecting the machine it keeps showing no equipment.

*May cause by the following reasons:

1. There is something wrong with the data cable;

2. Incompatibility with apple computer;

3. There is something wrong with the computer's USB port;

4. There is no D disk in the computer.

Please try to change the USB cable, reinstall the system, change the USB port, unplug some irrelevant cables, change the computer.


Fail to open the software can not open, it keeps showing that there is no D disk?

* Because your compter doesn't have D disk. The program is installed at D disk by default and the C disk need permission to install.

Solution: Install a D disk or change the computer.