ProductsPRODUCTS CENTER
  • 单路A380背面-天线特写500
  • FWT105-3无线接入台500-500
  • FWT105-2无线接入台500-500
  • A380背面-电源特写500
  • 单路A380背面-天线特写500
  • FWT105-3无线接入台500-500
  • FWT105-2无线接入台500-500
  • A380背面-电源特写500

FCT-FSK-A380-GSM Fixed Wireless Terminal

Can provide FSK caller ID mode.
With white A380 appearance and 2G industrial module.
Turn the phone card into RJ11 phone line in order to perfectly replace the operator’s telephone line(PSTN) in individual situation.
Cooperate with VOIP voice gateway, telephone set, traffic phone, analog voice board, PBX, telephone recording box, all kinds of security alarm host.
Available appearance of A350, A370, A360 or others.
For foreign cordless phones, intelligent telephone and other products that support FSK caller ID mode.

Related products :
  • product details
  • technical parameter
  • Related problems

   Fixed Cellular Terminal is short for "FCT" or “FWT",The FSK series can provide two kinds of caller ID: FSK and DTMF. GSM series adopts 2G industrial module and  GSM Network. 

You can convert the phone card into a telephone line(switch the SIM card into RJ11)and provide "reverse pole signal" to accurately billing.
If you are holding encryption card wireless calling card, contact us for technical support to decrypt and upgrade.

195b6265b86d23ce.jpg

-Can access tele set from outside; set various of functions through the phone button; facilitate compatibility adjustment.
-Can provide FSK caller ID mode.
-Carry with two RJ11 telephone ports, easily parallel connect landline,recording box and other similar equipment.
-LCD English display screen, digital visual display signal strength value.
-Can automatically supply voltage 5V-12V, easily apply power for all kinds of security equipment.
-Circuit with anti-jamming design, no noise in the call and other noise, sound clear.
-3 meters pure copper antenna, suitable for some bad signal scene, improve the communication signal.
-Built-in watchdog system; when the system doesn’t work, the phone box will automatically restart to prevent the wireless access station crash or other situation.
-Products can optional add an additional built-in battery, suitable for some security, elevators and other situations. Application of the blackout to make the distress call phone through telephone box.

产品功能

-Through the external connected telephone button, clear all the parameters and reset it.
-The FWT call volume can be set to avoid the sound is too large to produce an echo.。
-The IP prefix can be set by key, for some wireless fixed-line dial-up number, which need to add IP prefix. Different IP prefix can be provided for local, long distance or international call.
-Can set the FSK call ring mode, the same caller ID mode as the PSTN.
-The DTMF call ring can be set. Also perfectly compatible to solve a variety of caller ID is disappear or incomplete. 

(First ringing and then show the number or the first number and then ring)
-Caller ID mode supported FSK for special models, through the key settings to take effect. For only support FSK caller ID device, solve the problem of no caller ID.
-Can be set to prohibit incoming calls. Can be set an incoming call list or an incoming blacklist.
-Can set the second dial mode and automatically use it to outgoing call.

 (The second dial mode does not provide an accurate "reverse pole" signal.)
-Partial custom models can support the key setting in 12K or 18K billing signal mode.
-Can be set whether the telephone  comes with the screen or external telephone screen display device communication module IMEI.
-Can manually modify IMEI of the built-in communication module and offer the specified phone IMEI for the particular application.
-Can be set to "take up time", "busy tone time" to adapt special equipment applications in ideal compatibility.

应用场景

★ Cooperation with the telephone recording box: through RJ11 port to match up with wired telephone recording box and achieve the outgoing recording, incoming screen pop-up and so on through phone card. 
★ Cooperation with analog voice board: through RJ11 telephone wire to connect the analog voice board, through the phone card  to provide "anti-polar signal" telephone line for the voice card, and alternative operators telephone line (PSTN). With the call center software to achieve through the phone card access call center system and various applications.
★ Cooperation with pbx: through RJ11 telephone line to connect PBX, which through the phone box to call out. When phone is on,FWT will provide the "reverse pole signal" to inform PBX that phone is on. At the same time, it will provide a caller ID to PBX. Against for mostly telephone lines can not provide "reverse pole signal", resulting in part of the exchange function can not be used. What's more, some of the mobile phone cards cost low tariffs, it  provides more cheap choice of communication charge for enterprise exchange customers.
★ Cooperation with the traffic telephone: telephone line can be connected to the call center dedicated telephone, through traffic telephone to outgoing call. The caller ID will be displayed when the phone is connected. 
★ Cooperation with the wireless fixed-line card application: part of the fixed wireless card need to use a dedicated decryption card stickers. Part of the area can be customized built-in key to achieve the use of decryption stickers.
★ Cooperation with ordinary landline telephone: through the telephone wire to connect ordinary landline telephone, the equivalent of a "wireless fixed platform"; can easily achieve incoming, outgoing call, caller ID and so on.  
★ Cooperate with cordless phone: through the telephone line to connect with the cordless phone from foreign, or through the FSK caller ID mode to provide the caller ID for the cordless phone. Such as Panasonic KX-TG7875S.


 

I have brought this equipment for a long time, and it keeps displaying "dialing" and sometime the LCD show in reverse without connecting tel set and during a call. Even reset it cannot solve.

*The SRICK is broken, you can change it at a cell phone store or send back to us for repair.

Fail to open the software can not open, it keeps showing that there is no D disk?

* Because your compter doesn't have D disk. The program is installed at D disk by default and the C disk need permission to install.

Solution: Install a D disk or change the computer.

After connecting the machine it keeps showing no equipment.

*May cause by the following reasons:

1. There is something wrong with the data cable;

2. Incompatibility with apple computer;

3. There is something wrong with the computer's USB port;

4. There is no D disk in the computer.

Please try to change the USB cable, reinstall the system, change the USB port, unplug some irrelevant cables, change the computer.


The white marketing box cannot play voice normally.

*Firstly, test by the primary voice to exclude it might cause by voice, the voice must in MP3 format; 

 Secondary, copy the voice file at other place, formatting the memory card, reput the voice file in the memory card, restart the machine after insert the memory card; 

 Thirdly, change a new memory card; 

 Fourthly, if those methods metioned before don't work, the card slot is loosen and send back to repair.


During the usage of the white marketing box, the parameters are nomally, as well as the download. But when start it to test, it has interference between the computer and equipment as a result of high frequency.

*Exit the antivirus software, restart the machine and restore to default. 

 The antenna is too close to the machine.

 Turn off and then turn on.

 Change another computer.