ProductsPRODUCTS CENTER
  • A380侧面
  • A380背面-电源特写500
  • 单路A380背面
  • 单路A380背面-天线特写500
  • A380侧面
  • A380背面-电源特写500
  • 单路A380背面
  • 单路A380背面-天线特写500

FCT-FSK-WCDMA-A380L 3G Wireless fixed terminal

FCT(Fixed Cellular Terminal) provides two kinds of caller ID: FSK and DTMF.
Use WCDMA network standard 3G industrial module.
Turn the phone card into RJ11 phone line to perfectly replace the operator’s telephone line(PSTN) in individual situation.
Cooperate with VOIP voice gateway, telephone set, traffic phone, analog voice board, PBX, telephone recording box, all kinds of security alarm host.
Available appearance of A350, A370, A360 or others.

Related products :
  • product details
  • technical parameter
  • Related problems

    Fixed Cellular Terminal) is short for "FCT" or “FWT",The FSK series can provide two kinds of caller ID: FSK and DTMF.
 WCDMA adopts 3G industrial module and the WCDMA frequency band of the export abroad products need to be customized. Please contact us to get the specific price of different frequency.

195b6265b86d23ce.jpg

-Can access tele set from outside; set various of functions; facilitate the equipment to do compatibility adjustment.

-Can provide FSK caller ID mode.

-Carry with two RJ11 telephone port, easily parallel connect landline,recording box and other similar equipment.

-LCD English display screen; display the equipment information; facilitate to connect equipment.

-Telephone box can automatically supply voltage 5V-12V, easily apply power for all kinds of security equipment.

-Circuit with anti-jamming design, no noise in the call and other noise, sound clear.

-3 meters pure copper antenna, suitable for some bad signal scene, improve the communication signal.

-Built-in watchdog system; when the system doesn’t work, it will automatically restart to prevent crash or other situation.

-The device has an built-in SLIC communication module that can be used to accurately connect the "reverse pole signal". Also widely used in VOIP operating fee and other professional virtual operator field.

-Products can optional add an additional built-in battery, suitable for some security and elevator. Application of the blackout to make the distress call phone.6b6926e99aa0c1e4.jpg

-3G communication module is compatible with GSM and WCDMA network standard.

-Through the external connect telephone button, clear all the parameters and reset it.

-The fixed wireless terminal call volume can be set to avoid the sound is too large to produce an echo.

-The IP prefix can be set by key, for some wireless fixed-line dial-up number, which need to add IP prefix. What's more, different IP prefix can be provided for local, long distance or international call.

-Can set the FSK call ring mode, the same caller ID mode as the PSTN.

-The DTMF call ring can be set. Also perfectly compatible to solve a variety of caller ID is disappear or incomplete. (First ringing and then show the number or the first number and then ring).

-Caller ID mode supported FSK for special models, through the key settings to take effect. For only support FSK caller ID device, solve the problem of no caller ID.

-Can be set to prohibit incoming calls. Can be set an incoming call list or an incoming blacklist.

-Can set the second dial mode and automatically use it to outgoing call. (The second dial mode does not provide an accurate "reverse pole" signal.)

-Partial custom models can support the key setting in 12K or 18K billing signal mode.

-Can be set the phone box comes with the screen or external telephone screen display device communication module IMEI.

-Can manually modify the IMEI of the module and offer the specified phone IMEI for the particular application.

-Can be set to "take up time", "busy tone time" to adapt special equipment applications in ideal compatibility.

659a47085cbfce92.jpg

★ Cooperation with the telephone recording box: through RJ11 port to match up with wired telephone recording box and achieve the outgoing recording, incoming screen popup and so on through phone card. 

★ Cooperation with analog voice board: through RJ11 telephone wire to connect the analog voice board, through the phone card  to provide "anti-polar signal" telephone line for the voice card, and alternative operators telephone line (PSTN). 

★Cooperation with the call center software to achieve through the phone card access call center system and various applications.

★ Cooperation with pbx: through RJ11 telephone line to connect PBX , which through the phone box to call out. When phone is on, FWT will provide the "reverse pole signal" to PBX. At the same time, it will provide caller ID to pbx. Against for mostly telephone lines can not provide "reverse pole signal", resulting in part of pbx function can not be used. And some of the mobile phone cards cost low tariffs, it  provides more cheap choice of communication charge for enterprise pbx customers.

★ Cooperation with the traffic telephone: telephone line can be connected to the call center dedicated telephone, through traffic telephone to outgoing call. The caller ID will be displayed when the phone is connected. 

★ Cooperation with the wireless fixed-line card application: part of the fixed wireless card need to use a dedicated decryption card stickers. Part of the area can be customized built-in key to achieve the use of decryption stickers.

★ Cooperation with ordinary landline telephone: through the telephone wire to connect ordinary landline telephone, the equivalent of a "wireless fixed platform"; can easily achieve incoming, outgoing call, caller ID and so on.

blob



I have brought this equipment for a long time, and it keeps displaying "dialing" and sometime the LCD show in reverse without connecting tel set and during a call. Even reset it cannot solve.

*The SRICK is broken, you can change it at a cell phone store or send back to us for repair.

Fail to open the software can not open, it keeps showing that there is no D disk?

* Because your compter doesn't have D disk. The program is installed at D disk by default and the C disk need permission to install.

Solution: Install a D disk or change the computer.

Press any key to transfer but hungs up before playing voice.

*Check the on duty mode is transfer to tel set or mobile phone. If is to mobile phone, please check the balance of the vice card.


After connecting the machine it keeps showing no equipment.

*May cause by the following reasons:

1. There is something wrong with the data cable;

2. Incompatibility with apple computer;

3. There is something wrong with the computer's USB port;

4. There is no D disk in the computer.

Please try to change the USB cable, reinstall the system, change the USB port, unplug some irrelevant cables, change the computer.


The timing function of white marketing box will keep dialing to midnight, sometime the time is accuracy and sometime is not, which will dial at the time without setting.

*The advertising machine's time is desynchrony with Beijing time, re-download the parameters to the advertising machine.

 Firstly, turn on the timing function, setting 4 different period, which are not not in conflict. Then it is recommended to save the setting at the left side of the software after each step during the setting in case it does't work. Finally, unplug the date cable when the peremeters download is finished.

(Remark: don't click start voice and the black button beside the machine, otherwise it will be void)