ProductsPRODUCTS CENTER
  • FWT105-1无线接入台500-500
  • FWT105-2无线接入台500-500
  • FWT105-3无线接入台500-500
  • FWT105-4无线接入台
  • FWT105-1无线接入台500-500
  • FWT105-2无线接入台500-500
  • FWT105-3无线接入台500-500
  • FWT105-4无线接入台

FCT-WCDM[**]-[**]380L 3G-Fixed Cellular Terminal

FCT(Fixed Cellular Terminal)belongs to WCDMA series. With A380L and 3G industrial module.
Turn the phone card into RJ11 phone line in order to perfectly replace the operator’s telephone line(PSTN) in individual situation.
Cooperate with VOIP voice gateway, ordinary telephone landline, traffic phone, analog voice board, PBX exchange, telephone recording box, all kinds of security alarm host.
Available model: A350, A370, A360 or others.

Related products :
  • product details
  • technical parameter
  • Related problems

Fixed Cellular Terminal is short for FCT or FWT. WCDM[**] adopts 3G industrial module and the WCDM[**] frequency band of the export abroad products need to be customized. Please contact us to get the specific price of different bands. 

195b6265b86d23ce.jpg

-Can access tel set from outside; facilitate the equipment to do compatibility adjustment.

-Carry with two RJ11 telephone ports;easily parallel connect landline,recording box and other similar equipment.

-LCD English display screen; display equipment information; facilitate to connect equipment.

-Can automatically supply voltage 5V-12V, easily apply power for all kinds of security equipment.

-Circuit with anti-jamming design, no noise in the call and other noise, sound clear.

-3 meters pure copper antenna,improve the communication signal.

-Built-in watchdog system; prevent the wireless access station crash or other situation.

-With built-in SLIC communication module that can be used to accurately connect the "reverse pole signal". 

-[**]lso widely used in VOIP operating fee and other professional virtual operator field.

-Can optional add an additional built-in battery, suitable for some security and elevators. [**]pplication of the blackout to make the distress call phone through telephone box.

6b6926e99aa0c1e4.jpg

-3G communication module is compatible with GSM and WCDM[**] network standard; 

-Through the external connect telephone button, clear all the parameters and reset it.

-The  volume can be set to avoid the sound is too large to produce an echo.

-IP prefix can be set. Different IP prefix can be provided for local, long distance or international call.

-The DTMF call ring can be set. [**]lso perfectly compatible to solve a variety of caller ID is disappear or incomplete. 

(First ringing and then show the number or the first number and then ring).

-Caller ID mode supported FSK for special models, through the key settings to take effect. 

-Can be set to prohibit incoming calls. Can be set an incoming call list or an incoming blacklist.

-Can set the second dial mode and automatically use it to outgoing call. 

(The second dial mode does not provide an accurate "reverse pole" signal.)

-Partial custom models can support the key setting in 12K or 18K billing signal mode.

-Can be set the phone box comes with the screen or external telephone screen display device communication module IMEI.

-Can manually modify IMEI of the module and offer the specified phone IMEI for the particular application.

-Can be set to "take up time", "busy tone time" to adapt special equipment applications in ideal compatibility.

 

659a47085cbfce92.jpg

★Cooperation with the telephone recording box: through RJ11 port to match up with wired telephone recording box and achieve the outgoing recording, incoming screen popup and so on through phone card. 
★ Cooperation with analog voice board: through RJ11 telephone wire to connect the analog voice board, through the phone card  to provide "anti-polar signal" telephone line for the voice card, and alternative operators telephone line (PSTN). With the call center software to achieve through the phone card access call center system and various applications.

★ Cooperation with pbx: through RJ11 to connect PBX, which through the phone box to call out. When phone is on, FWT will provide the "reverse pole signal" to inform pbx that phone is on. [**]t the same time, it will provide a caller ID to pbx. [**]gainst for mostly telephone lines can not provide "reverse pole signal", resulting in part of pbx function can not be used. What's more, some of the mobile phone cards cost low tariffs, it provides more cheap choice of communication charge for enterprise exchange customers.

★Cooperation with the traffic telephone: telephone line can be connected to the call center dedicated telephone, through traffic telephone to outgoing call. The caller ID will be displayed when the phone is connected. 
★Cooperation with the wireless fixed-line card application: part of the fixed wireless card need to use a dedicated decryption card stickers. Part of the area can be customized built-in key to achieve the use of decryption stickers.
★Cooperation with ordinary landline telephone: through the telephone wire to connect ordinary landline telephone, the equivalent of a "wireless fixed platform"; can easily achieve incoming, outgoing call, caller ID and so on. 

 

The timing function of white marketing box will keep dialing to midnight, sometime the time is accuracy and sometime is not, which will dial at the time without setting.

*The advertising machine's time is desynchrony with Beijing time, re-download the parameters to the advertising machine.

 Firstly, turn on the timing function, setting 4 different period, which are not not in conflict. Then it is recommended to save the setting at the left side of the software after each step during the setting in case it does't work. Finally, unplug the date cable when the peremeters download is finished.

(Remark: don't click start voice and the black button beside the machine, otherwise it will be void)



The white marketing box can not be called in.

*By default, you need to press to transfer after playing voice; if choosing ring and waiting for answering, it can be call in like ordinary tel set. Both tele set and marketing box can show caller ID.

[**]fter connecting the machine it keeps showing no equipment.

*May cause by the following reasons:

1. There is something wrong with the data cable;

2. Incompatibility with apple computer;

3. There is something wrong with the computer's USB port;

4. There is no D disk in the computer.

Please try to change the USB cable, reinstall the system, change the USB port, unplug some irrelevant cables, change the computer.


Fail to open the software can not open, it keeps showing that there is no D disk?

* Because your compter doesn't have D disk. The program is installed at D disk by default and the C disk need permission to install.

Solution: Install a D disk or change the computer.

Faild to open the software, it keeps showing copyright issues.

*Your computer got virus, install anti-Virus software; then directly open the R[**]R file without unzip it.